Search This Blog

Tuesday, 2 December 2014

dish tv problem solution

Q- how pairing of VC in other set top box of dishtv ?
A- send a mail to customer care mentioning your old and new STB at customercare@dishtv.in
they will pair your STB with card. 
Q- Old Dishtv STB Not Working Properly So Can i Use New STB with inserting of Old VC.It's Working are not ? Because OLD VC Active For 3Years FTA Pack...
A- your  pack will got deactivated when u change ur stb ...stb can be paired to the old vc
Q- Help How to downgrade firmware dishtv stb = I.m using dish tv zenega 1004is receiver I using old firmware this receiver but this receiver not supported com port so friend help me how to downgrade firmware and flash old firmware without com port stb
A- DOWNLOAD LOADER AND

1. RS 232 CABLE CONNECT

NOW FOLLOW THESE STEP
Y…2. OPEN LOADER AND UPLOAD DATA SAVE FILE RENAME STB ***** NUMBER 5 DIGITS FOR EXAMPLE (12345.bin) AS SHOWN FILE 322KB

3. NOW ONCE AGAIN OPEN LOADER SELECT DATABSE OPTION AND SELECT BOOTING FILE THE STB PROCESSING AND YOUR SET BOC DEAD BUT DONT WORRY

4. NOW ONCE AGAIN OPEN LOADER SELECT PROGRAME DATA AND STB PROCESSING FINALLY YOUR STB BOX FREE TO AIR FOR FOR ALL SATTELIATES
THIS FILE ONLY WORK IN DISH TV ZEINGA 1004is ONL

Download Link.......

http://www.mediafire.com/download/cvroq7wvpudehj1/%5BMegafileupload%5Dboot%2520zenega.rar


Q- Help DishTV Zenega CD1004is signal problem = I have a zenega CD1004is receiver ( soft ver 4.72 ), in which i am receiving 11038 H signal ( 65 % ) ,but home transponder ( 12688 V ) and all other frequencies are 2% to 3% percent signal quality. I tried resetting to factory default. Tried STB to STB software download ( using RS-232 null cable ) But the problem remains.
I confirmed that my LNB and Cable are ok by connecting another working Zenega CD1004is receiver , it was receiving over 65 % signal on all frequencies.
I opened receiver and checked for Leaking and bulging capacitors, but did not find any. Now i made 11038H my home transponder and i'm receiving 10 to 12 channels... But how to get back the other V and H frequencies ?
A - Please change Symbol Rate from 27500 to 3000 for TP 12688 (Hor), 12647 (Hor), 11172 (Ver) and see if any improvement in Signal Strength and Quality. To do so, press BLUE button on selected frequency in the Home Frequency Screen or you can change it manually.
Press 9523 to change the frequencies if you want only.
Apart from that don't change if there is no real need....
And did you try a receiver in the place where this box is fixed? 

Videos

HOW TO CHECK VIDEOCON D2H SIGNAL

Zing Digital Antenna Installation

SAMSUNG S7392 FLASHING

MORE...IN "VIDEOS" PAGE