AIWA
MODEL 1402, 2002, 2101 SERVICE CODE
Entering into service mode
Press Display key on remote handset and ( S009 ) button on TV set, simultaneously.
"serv" will be displayed on screen to indicate that the TV is now in service mode.
SERVICE MODE KEYS
In service mode use following Handset keys
1. ( Channel + ) and ( Channel _ )
Select setting item.
2. Volume + and Vo;ume _
To increase and decrese value of setting item.
3. ( P_ )
To store the new value in memory.
Storage is necessary before proceeding to the next setting otherwise the adjusted value will be lost and previous value will remain in memory
MODEL 1402, 2002, 2101 SERVICE CODE
Entering into service mode
Press Display key on remote handset and ( S009 ) button on TV set, simultaneously.
"serv" will be displayed on screen to indicate that the TV is now in service mode.
SERVICE MODE KEYS
In service mode use following Handset keys
1. ( Channel + ) and ( Channel _ )
Select setting item.
2. Volume + and Vo;ume _
To increase and decrese value of setting item.
3. ( P_ )
To store the new value in memory.
Storage is necessary before proceeding to the next setting otherwise the adjusted value will be lost and previous value will remain in memory
Service mode adjustments
The
settings which are required for this TV set are listed below in sequence. When
the functions are accessed by the ( Channel +/- ) keys there are some functions
displayed on screen which are not in the list below. Alignments of these
functions are not required and changing the alignment values has no effect at
all.
1.
Horizontal position ( HOR PO )
2.
Blanking
Phase . ( BL PHA )
3.
Vertical Amplitude ( VER AM )
4.
Vertical S-Correction ( S.CORR )
5.
Vertical Symmetry ( VER SM )
6.
Chroma / Luma Shift ( CHR LU )
7.
Colour Burst
VCO ( VCO AD )
8.
Red Cut Off ( CUT R )
9.
Green Cut Off ( CUT G )
10.
Blue cut off ( CUT B )
11.
Red Drive ( DRIV R )
12.
Green Drive ( DRIV G )
13.
Blue Drive ( DRIV B )
Service Mode Adjustments- Examples
Blanking Phase and
Horizontal Position setting
1.
Connect center cross TV channel signal generator
to antenna jack.
2.
Access the horizontal position function by (
CHANNEL +/- ) key on remote handset.
3.
Adjust the picture to full right by ( VOL +)
4.
Access
the blanking pulse function by ( CHANNEL + ) key
5.
Adjust the blanking pulse position just enters
the picture edge by ( VOL +/-) KEY
6.
Press ( P - ) to memorize the blanking pulse
position.
7.
Access to the horizontal position again by (
PROG - ) key
8.
Adjust horizontal symmetrical position of the
picture on screen by (VOL +/- )
9.
Press ( P -) once
