Search This Blog

Saturday, 9 May 2015

videocon d2h installation password

Go to – Menu Setup - Installation
Enter installation code 1234

Box settings - Satellite management - Enter advance settings password (4th, 6th, 8th and 10th digits of your VC CARD number)

Press yellow key on your remote (ADD SAT option in satellite management)
Enter sat name or simply press ok
Make sure that LNB type is universal; LNB power is ON, 22 kHz on and Scroll down to transponders and press ok to EDIT TP
Save satellite settings and press yellow key remote (ADD TO option on transponder edition)
Enter the frequency 10600 and 05150 and press ok
Select polarization to V OR H, FEC to ALL, enter symbol rate ………….. and save the settings you have entered.
Check for signal strength and scan the satellite. Then you will get channels.